Linearizer
The Linearizer™, series WP-400, is designed to raise or lower a worker to the optimum working height for maximum productivity with minimum risk of back injury and fatigue.  Ergonomically speaking, the optimum working elevation for most jobs is 2" below elbow height.  Typical applications might include packing stations, heavy machinery such as drill presses, lathes and saws, individual work cells or work areas where height is a problem.  The WP-400 may be used in a clean room environment since the lifting source is an electric linear actuator.  An ergonomic anti-fatigue mat is included on the platform.  For minimizing cumulative trauma injuries, the Linearizer™ is the obvious choice.

Operation
Operation of the Linearizer™ is as simple as pushing a button.   An electric linear actuator is used to raise or lower the platform to the optimum ergonomic level.  Unit is operated with a 24V pendent hand held push button control on an 8' cord.  The actuator power supply may be either 110V A/C or 24V D/C.   A/C power unit includes battery with built-in battery charger.  Both power units are UL approved.  The WP-400 includes two rigid casters on the back side to facilitate ease of movement.

back to top^

Posi-Crank

The Posi-Crank ergonomic work station is an economical variable height worker positioner.  With a simple turn of a crank, the platform height may be adjusted to the optimum ergonomic level suitable for each operator.  Benefits of the Posi-Crank include minimizing the risk of cumulative trauma injuries, back injuries and fatigue while maximizing efficiency and operator morale.

The Posi-Crank incorporates the use of acme threaded rods and a series of gears for simple yet effective height adjustment.  A heavy duty chain is used in lieu of a belt to ensure a positive working height without risk of slippage.  The crank handle may be removed and placed on the handle holder for maximizing the operating space.  The deck is constructed of 1/8" steel tread plate for strength and the best traction.  Maximum capacity is 500 pounds.  Vertical travel range is 3" lowered to 19" raised.  The Posi-Crank is constructed of steel  to provide for years of service.  The unit is painted blue.   Optional anti-fatigue matting is safety yellow.

back to top^

Opti-Bench

The Opti-Bench is an ergonomic work station featuring a variable height working surface for accommodating different sized workers.  This work station utilizes a manual hand crank which will easily raise or lower the working surface.   Use the Opti-Bench for minimizing the risk of back injury, boosting worker morale and reducing the risk of an OSHA violation.

The Opti-Bench facilitates the same ergonomic features found in the design of the Posi-Crank.  The working surface may be adjusted from a lowered height of 30" to a raised height of 46".  The maximum capacity of the bench is 500 pounds.  Four standard sizes are available.  A handy storage shelf is located underneath the working surface.  The Opti-Bench is constructed of steel for standing up to heavy duty industrial use and abuse.  The unit is painted blue.

back to top^

Add-A-Level

The Add-A-Level is constructed from a high-density polyethylene resin which is 100% recycled.  The capacity is 250 pounds per square foot.  The unit is available in three different heights (2-5/8", 5-1/4" or 7-7/8") and four different overall top sizes (24" x 36", 24" x 66", 24" x 96" and 36" x 96").  Color is black.

• Raise to optimum working level
• Raise off concrete floors onto "Anti-Fatigue" surface.
• Raise above uneven broken floors
• Raise above wet and cold floors (Keep feet at room temperature, not floor temperature)
• Raise out of oily and/or corrosive liquids.
  

back to top^

Indoff - Work-Positioner home                Contact your Experienced Indoff Salesman                 www.mh-partners.com